Skip to main content

Trek Slash 9 (2014)


Trek’s Slash has been completely reworked around the 650b wheel size this year, offering more aggressive, raceready geometry as well as a significant reduction in weight. We tested the priciest of the three Slashes available.

The frame
Even with the introduction of bigger wheels, Trek have opted to slacken the Slash’s head angle to 65 degrees (when in the low setting) and stretch the effective top tube to 600mm (on our 18.5in test bike), bolstering stability when the speeds creep up. They’ve dropped the bottom bracket to a more corner carving friendly 350mm too. There’s also the option to tweak the geometry slightly via the Mino Link flippable chip, located at the rear of the one-piece magnesium EVO Link. This alters the bottom bracket height by 8mm and the head angle by 0.6 degrees. The Slash continues to use Trek’s patented ABP (Active Braking Pivot), Full Floater suspension system and their DRCV (Dual Rate Control Valve) rear shock technology.

The kit
The top-flight Slash is equipped with a mix of SRAM XX1 and X01 11-speed kit, giving a wide enough range of gears to tackle just about any climb or descent. The RockShox Reverb dropper post remote integrates neatly with the Avid X0 Trail brakes for a clean, clutter-free handlebar.

The ride
The reduction in weight and active rear end help make the Slash feel playful and sprightly on the trail – it rides a lot lighter than its 13.6kg weight would suggest. The roomy cockpit – even with a stubby 50mm stem – gives plenty of breathing room on the climbs too. Point the Slash into rough, chattery terrain – especially when the speed picks up – and it rips. That supple back end smooths out the trail impressively, and the slack head angle and lengthier front centre give confidence when you start really moving. Slinging the bike through fast corners does get you thinking about the suspension balance though. To make the Fox 34 fork feel supportive enough, we had to run a reasonably high spring pressure. This meant it didn’t match the plush, active feel of the rear (with the DRCV shock in ‘descend’ mode), leaving us working the bar harder to stay on line and making it difficult for more aggressive riders to load the bike through the turns. Flicking the shock into ‘trail’ mode helps balance the suspension, and it’s where we spent the  ajority of our time. It does make us wonder how the Slash 9 would behave with a tuned, plusher fork plugged in. Still, there’s no denying that the changes made to the Slash help bolster confidence and fun on the trail.


FRAME Alpha Platinum Aluminium, 160mm (6.3in) travel
FORK Fox 34 TALAS FIT CTD (Factory Series), 160-130mm (6.3-5.1in) travel
SHOCK Fox Float DRCV CTD (Performance Series)
DRIVETRAIN SRAM XX1 crankset and rear mech, X01 shifter
WHEELSET Bontrager Rhythm Comp tubeless ready wheels, Bontrager XR4 Team Issue 27.5x2.35in tyres
BRAKES Avid X0 Trail BAR/STEM Bontrager Rhythm Pro carbon, 750mm/Bontrager Rhythm Pro, 50mm
SEATPOST/SADDLE RockShox Reverb Stealth/Bontrager Evoke 3 Ti
WEIGHT 13.6kg (30lb) with pedals

PRICE  5,770$ (complete bike)

The Slash has been redesigned around 650b wheels for 2014








The SRAM XX1 rear mech helps deliver clean and crisp shifting


Popular posts from this blog

KONA SHRED

With a reputation for no-nonsense ruggedness and a background in the always progressive and punishing riding of Canada, Kona have been building hardcore hardtails for longer than almost anyone else. The Shred is the most expensive bike on test but it’s a proper trail tank.

Cannondale Trail SL 29 SS

The fat aluminium tubes are a constrast to the skinny items seen elsewhere in the test, but this rigid Cannondale uses them to create one of the most old-school - and lightest - rides here.

Marzocchi 350 NCR fork

Italy's most famous fork manufacturer aims directly at the high profile, high performance enduro race scene but it needs patience to reveal its potential.

ENVE M50 29" Wheels

Utah based company ENVE have been making drool-worthy carbon components for some years now. Despite the fact that carbon rims are becoming more and more common on mountain bikes these days, you can guarantee that ENVE wheels will be a talking point when someone is eyeing off a steed. Instantly, the big bold logos on each rim scream "fast", "light" and to some extent, "expensive" The kids call this 'bling'.

NS Bikes Metropolis bike

There aren’t many companies like NS Bikes, whose entire product range is designed around getting rad, ripping corners and boosting jumps. The Polish brand are passionate about freeride and have gained a reputation for building heavy-hitting,wellspecced and reasonably-priced bikes. This latest incarnation of their Metropolis dirt jump rig follows in this vein, with a doublebutted 4130 chromoly frame and an array of reliable kit. The frame mixes MTB and BMXtechnology, using a threaded bottom bracket and Race Face AEfect two-piece crankset in combination with horizontal dropouts and an integrated headset and seat clamp. A Manitou Circus Elite fork gives 100mm of air-sprung travel, with a 20mm front axle to maintain stifness. The Metropolis rolls on 26in NS Fundamental rims, fitted with Kenda Small Block 8 tyres. We reckon the combo of chrome frame and tan-wall rubber looks pretty rad too! The full build weighs a fairly robust 12.13kg , but it should have no problem shrugging of s...